how to clean a dvd player head
How to Repair the Videodisc Player along a Computer
Away Ty Arthur
i Sony
DVD drives connected a information processing system backside stop functioning for a variety of reasons related to some physical hardware failures and software system changes. Rather than buying a unscathed hot drive at the first mansion of ail, try several different troubleshooting steps to get the DVD player working properly again.
Hold the LED light on the drive and see if it turns on patc the computer is high-powered on. Press the squirt button on the face of the drive and await to see if the disk tray pops unstylish or remains in the drive.
Restart the electronic computer and press the turn out button again in incase the reckoner stopped recognizing the cause. Place a micro straight objective such as an unfolded paper-clip end in between the seams of the Videodisc drive platter tray. Pull it gently outwards towards you to see if there is an object blocking the tray from opening along its own.
Navigate to the "Control Panel" in your computer's "Start up" menu. Click on the icon labeled "Device Managing director." Scroll down through the list of options and snap on the addition polarity next to the entree that says "DVD/Compact disc read-only memory Drives." Right snap on the advert of the DVD drive and click on "Update Driver Software system."
Click along "Search For Drivers" on the new window that testament appear and wait for the driver to finish downloading. Restart the computer once again and attempt to use the drive.
Eject the magnetic disc tray if the drive has power and put across a lens cleaning DVD inside. Close the tray then delay for the lense cleaning course of study to automatically start. Click on the "My Calculator" image on your background then equivocal cluck the DVD drive if your computer doesn't automatically start the lens cleaning. Check the instructions that came with the lens cleaning disc to see how long the DVD should continue spinning. Eject the disc once the correct sum of time has elapsed. Place another DVD in the tray and try using the drive in again.
World power off the computer and pull impermissible all of the cables from the back side of the case. Set the computers on its side and remove the grammatical case screws on the top and bottom ends. Slide the case panel dispatch.
Take out the screws holding the DVD drive into the tug bay. Slide the drive out and spray it off with canned melody. Spray out the cause colorful to remove any dust particles. Put the take back into the bay and re-connect the screws. Remove the SATA cable that runs from the DVD drive to the exponent supply and replace it with a new one and only (see Resources below).
Put the slope impanel endorse on the case. Reconnect the screws and then reattach all of the cables. Ability the computer on and attempt to use the DVD drive again.
Tips
- Contact the manufacturer of the DVD drive for a replacement if it still does not work after replacement the SATA cable and the warranty period has non yet ended.
Warnings
- Forever basis yourself before working with the internal components of your computer by briefly touching any solid metal object connected to the flooring.
Writer Bio
Ty Arthur has been writing technical and entertainment-related articles for a variety of online sources since 2008. His articles have appeared on Metalunderground.com and many other websites. Arthur accompanied the Good Waterfall College of Applied science and studied both computing and creative writing.
how to clean a dvd player head
Source: https://itstillworks.com/repair-dvd-player-computer-4896164.html
Posted by: mosbybress1948.blogspot.com
0 Response to "how to clean a dvd player head"
Post a Comment